Copper Bonded Earthing Rods

Laxmi Power Solutions is a leading supplier of Copper Bonded Earthing Rods. Our manufacturing process adheres to all parameters as prescribed by IS: 3043-1987 as well as UL.

Laxmi power solutions is a premier supplier of Copper Bonded Earthing Rods. Our manufacturing procedure adheres to all parameters as prescribed by IS: 3043-1987 in addition to UL. Copper Bonded Earthing Rods are robust, have longer shell life and efficient in dissipating fault current in comparison to plates or pipes. Copper Bonded Earthing Rods supplied via Sarvayogam Corp are available in following dimensions preferred length: 2 Meter, 3 Meter, can be custom designed in terms of length as per the requirement of project standard Copper coating thickness: 100 Microns, 250 Microns Base material: Low Carbon metallic rod of high tensile strength.

1. 17.5 MM
2. 25 MM
3. 32 MM
4. 38 MM

Copper Bonded Earthing Rods
have the capabilities to be deep driven into the soil. This is helpful in difficult terrains and rocky terrains where the normal resistivity of the soil is high and it becomes difficult to achieve lower resistances.
As per IS 3043: 1987, one can achieve lower resistivity at depths at greater depths. Often these levels are some meters below the surface. The most economical way of reaching them is by Deep Driven Earth Rod Electrodes. When deep driving is not possible mainly due to rocks, underneath, parallel driven shorter rods, plates, mates or buried conductors or a combination of three can be used.

Earth Rod Electrodes:
Earth rods are commonly made from solid copper or stainless steel with copper bonding. Copper Bonded Earthing Rods or Copper Bonded Grounding Rods are commonly used due to strength, corrosion resistance and comparatively low cost.

Copper Bonded Earth Rod System: This system includes rod along with accessories.
Driving Stud: These are made from steel & suitable for use with Power Hammers Coupling: These are made from copper alloy & counter bored to enclose threads. Coupling is high strength & also highly corrosion resistant. These are used to connect driving stud to rod or rod to rod Rod: Steel rod with core of low carbon provides tensile strength at least of 600 N/ mm2. These rods are molecularly bonded with 99.9 % pure electrolytic copper up to thickness of 0.25 mm, Rolled threads at each end gives strength than cut threads Clamp: These are made from high copper content alloy strong resistance to corrosion

Features of ideal earthing:
Low electrical resistance to earth
Resistance to corrosion
Ability to carry high currents repeatedly
Less Maintenance & reasonable lifespan

LPS Saving the Universe from Electric Shock.

With access to 24 hour assistance, you can continue to help others.

Fill up the form

LPS Products / LPS Services

Laxmi Power Solutions is well known name when it comes to Chemical Earthing Products and Equipment whether its Chemical Earthing, Earthing Electrodes, Chemical Back Fill Compound, Copper Bonded Earthing Rods or Conventional Earthing.

Subscribe to our

***We Promise, no spam!